September 23, 2021 WBUR56 PRODUCT SPECIFICATION WBUR56 IEEE 802.11 a/b/g/n/ac 2x2 + BT5 Combo Module Product Specification 1.0 Approved: Approved: Prepared by: ________________________ _________________________ _________________________ Zeke Wu Manager Ben Ho Supervisor Wayne Chang Engineer FOXCONN CONFIDENTIAL This preliminary specification is subject to change without notice. Copyright © 2017 Hon Hai Precision Ind Co., Ltd.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION Revision History Date Number Approver Comments 2021/Sep/23 1.0 Cathy Kuo Initial Released RESTRICTED AND CONFIDENTIAL INFORMATION STATEMENT All information contained in this document is the exclusive property of Foxconn Technology Inc. and its development partners. Any reproduction or disclosure of all or part of this document without the expressed written consent of Foxconn Technology Inc. is strictly prohibited.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION CHAPTER 1. MODULE OVERVIEW The Foxconn WBUR56 is a highly integrated module that support 2-stream 802.11ac solutions with Multi-user MIMO with WLAN USB2.0 network interface controller. It combines a WLAN MAC, a 2T2R capable WLAN baseband, and RF in a single module. The WBUR56 provides a complete solution for a high-performance integrated wireless and Bluetooth device.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION 1-2 Pin definition 12……10 Figure 1 Pin Definitions (Module Top View) Table 1 Pin Definitions FOXCONN CONFIDENTIAL This preliminary specification is subject to change without notice. Copyright © 2017 Hon Hai Precision Ind Co., Ltd.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION CHAPTER 2. 2-1 ELECTRICAL AND RF SPECIFICAITON Recommended Operation Rating Table 2 Operation Rating Parameter VDD RF Interface 2-2 Condition 3.3V Zo Min 3V Typ. 3.3V 50 Max. 3.6V Unit V Ohm Power Consumption Power consumption is measured using current probe loop on the Power rails of the USB interface (Pins).
September 23, 2021 WBUR56 PRODUCT SPECIFICATION 2-3 WiFi RF Specification – TX Table 4 IEEE 802.11 b/g/n TX Average Maximum Output Power North America(NA), Asia-Pacific(AP) Band@2.4GHz 802.11b 802.11g 802.11n-HT20 802.11n-HT40 Data Rate(Mbps) 1 2 5.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION Table 5 IEEE 802.11 a/n/ac TX Average Maximum Output Power North America(NA), Asia-Pacific(AP) Band@5GHz 802.11a (5150-5725MHz) (5725-5850MHz) 802.11n-HT20 802.11ac-VHT20 (5150-5725MHz) (5725-5850MHz) 802.11n-HT40 802.11ac-VHT40 (5150-5725MHz) (5725-5850MHz) 802.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION 2-4 WiFi RF Specification – RX Table 6 IEEE 802.11 b/g/a/n/ac RX Sensitivity (WLAN0&WLAN1) Data Rate (Mbps) Modulation Rx Sensitivity (dBm) 1 2 5.5 11 6 9 12 18 24 36 48 54 DBPSK DQPSK CCK CCK OFDM OFDM OFDM OFDM OFDM OFDM OFDM OFDM Max. -88 -85 -82 -79 -82 -81 -79 -77 -74 -70 -66 -65 Typ. -91 -88 -85 -82 -87 -86 -84 -82 -79 -75 -71 -70 Data Rate (Mbps) Modulation Rx Sensitivity (dBm) HT20-7.22 HT20-14.44 HT20-21.67 HT20-28.89 HT20-43.33 HT20-57.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION 2-5 Bluetooth RF Specification Parameter Condition Basic Data Rate – Transmit Performance RF Transmit Power (TRM01) Power Density (TRM02) Per 100kHz Power Control (TRM03) TX Output Spectrum – F(low)- CH0 Freq. Range (TRM04) F(high)-CH78 TX Output Spectrum – 20dB BW (TRM05) TX Output Spectrum – ∣f-f0∣= 2MHz Adjacent Channel Power (TRM06) ∣f-f0∣≥ 3MHz TX Output Spectrum – 30MHz – 1GHz Out of Band Spurious Emission 1GHz -12.75GHz 5.15GHz -5.35GHz 5.725GHz-5.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION TX Output Spectrum – Out of Band Spurious Emission 30MHz – 1GHz 1GHz -12.75GHz 5.15GHz -5.35GHz 5.725GHz-5.825GHz Enhanced power control (TRM14) Step Size Difference. Btw. GFSK, π/4 DQPSK,&8DPSK Basic Data Rate – Receiver Performance Sensitivity at 0.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION 2-6 Bluetooth Low Energy RF Specification Parameter Transmit Performance RF Transmit Power (TRM-LE01,02) In-Band Emission (TRM-LE03,04) TX Output Spectrum – Out of Band Spurious Emission Modulation Characteristic (TRMLE05) Condition Min. Typ. 0 ∣f-f0∣= 2MHz ∣f-f0∣≥ 3MHz 30MHz – 1GHz 1GHz -12.75GHz 5.15GHz -5.35GHz 5.725GHz-5.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION 2-7 Power On Sequence Figure 2 Power On Sequence FOXCONN CONFIDENTIAL This preliminary specification is subject to change without notice. Copyright © 2017 Hon Hai Precision Ind Co., Ltd.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION 2-8 Antenna Specification Requirement Nominal antenna port impedance specification is 50 ohms for the Foxconn WBUR56 hardware. For regulatory requirements, it is assumed that the antenna gain are: WLAN Type : PCB, Internal BT Type : PIFA, External FOXCONN CONFIDENTIAL This preliminary specification is subject to change without notice. Copyright © 2017 Hon Hai Precision Ind Co., Ltd.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION CHAPTER 3. 3-1 MECHANICAL SPECIFICATION Module Assembly Dimension Top View Side View FOXCONN CONFIDENTIAL This preliminary specification is subject to change without notice. Bottom View Copyright © 2017 Hon Hai Precision Ind Co., Ltd.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION Figure 3 Mechanical Drawing 3-2 Label Specification Figure 4 Label Drawing FOXCONN CONFIDENTIAL This preliminary specification is subject to change without notice. Copyright © 2017 Hon Hai Precision Ind Co., Ltd.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION CHAPTER 4. 4-1 ADDITIONAL INFORMATION EEPROM Information Table 7 USB PID/VID Setting WLAN Type Realtek RTL8822CU Wireless LAN 802.11ac USB 2.0 Mass Production Network Adapter 4-2 Mode PID VID AC C82C 0BDA Module Photo Figure 5 Top Side Photo Figure 6 Bottom Side Photo FOXCONN CONFIDENTIAL This preliminary specification is subject to change without notice. Copyright © 2017 Hon Hai Precision Ind Co., Ltd.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION 4-3 Environment Specification Operation Operation Temperature : 0~55 degree Relevant Humidity: 5 ~ 90% (non-condensing) Storage Operation Temperature : 0~55 degree Relevant Humidity: 5 ~ 90% (non-condensing) FOXCONN CONFIDENTIAL This preliminary specification is subject to change without notice. Copyright © 2017 Hon Hai Precision Ind Co., Ltd.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION CHAPTER5: WIRELESS MODULE INSTALLATION PROCEDURE 1, Prepare wireless module and open connector as red part 2, Prepare a FFC(Flexible Flat Cable) to connect with wireless module connector and press 3, Another FFC site to connect with host main board and press 4, Module connection BT antenna as blue part FOXCONN CONFIDENTIAL This preliminary specification is subject to change without notice. Copyright © 2017 Hon Hai Precision Ind Co., Ltd.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION CHAPTER6: REGULATORY STATEMENT FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or colocation with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION ISED Statement: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de classe B est conforme à la norme canadienne ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or colocation with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
September 23, 2021 WBUR56 PRODUCT SPECIFICATION Antennas The following antennas have been certified for use with this module; antennas of the same type with equal or lower gain may also be used with this module. The antenna must be installed such that 20 cm can be maintained between the antenna and users. This radio transmitter [2878F-WBUR56] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated.
