User's Manual

8
3. Get the comport information
After connected micro USB cable to PC, user can check the COM
number in "Device Manager", for instances, below figure indicates the
COM number is 3.
4. Execute the terminal utility(PuTTY)
The connection information of LoRa Module is Baud Rate 9600, Data
bits 8, Parity none, Stop bits 1 and Flow control none. Here is an example
using PuTTY to access UART interface.
Click the Open button, then, click the Enter button on the keyboard.
When you see the #CMD:[] which means the connection is successful.