User's Manual

19 / 37
Figure 16: DHCP settings
 Click the “Apply” button for modification take effect.
6.2.3 IPv6
 To enable IPv6 function in LAN network:
 Launch a web browser from a computer that is connected to DTU and access to web management
system.
 Go toSettings > LAN > IPv6page, choose “On”.
Figure 17: IPv6 setting
 Click the “Apply” button for modification take effect.
6.2.4 MTU
 To change MTU(Maximum Transmission Unit) size of Ethernet interface:
 Launch a web browser from a computer that is connected to DTU and access to web management
system.
 Go toSettings > LAN> MTUpage, input the target MTU size (valid range: 68~1500).
Figure 18: MTU setting
 Click the “Apply” button for modification take effect.