User's Manual

26 / 37
6.5 TR069
With the TR069 service (CPE WAN Management Protocol, Reference [4]. It is intended to support a variety
of functionalities to manage a collection of CPE), you can manage DTU on ACS (Auto-Configuration Server,
e.g. Friendly ACS), including the following primary capabilities:
- Auto-configuration and dynamic service provisioning
- Software/firmware image management
- Status and performance monitoring
- Diagnostics
 To initiate the TR069 service, you need to set correct parameters firstly:
 Launch a web browser from a computer that is connected to DTU and access to web management
system.
 Go to Settings > Firewall > TR069page, input relevant parameter value.
Figure 34: Setting TR069 connection parameters
Table 11: TR069 parameters
Parameter
Description
Server URL
Connection address of ACS.
Server User
Username used to authenticate the DTU when making
a connection to the ACS.
Server Password
Password used to authenticate the DTU when making
a connection to the ACS.
Enable Periodic Inform
Whether or not the DTU MUST periodically send CPE
information to the ACS using the Inform method call.
Periodic Inform Interval
The duration in seconds of the interval for which the
CPE MUST attempt to connect with the ACS and call
the Inform method if PeriodicInform is enabled.