Lateral File Instructions

OPTIONAL DIVIDERS
Plate Divider:
1. With lower tab pointing down and rear
tabs pointing toward rear of drawer, lay
divider flat on bottom of drawer.
2. Insert lower tab into the desired slot on
the bottom of drawer and pivot top of
divider upward.
3. Align rear tabs with slots on rear of
drawer.
4. Push divider toward rear of drawer until
rear tabs lock into slots.
5. Reverse procedure to remove divider.
Wire Divider (Binder Storage Only):
1. Squeeze sides of divider and align bot-
tom ends (U-shaped flanges) of divider
with cut outs in shelf.
2. Insert U-shaped flanges into cut-outs
in shelf.
3. Slide divider toward side wall of cabi-
net, inserting edge of shelf cut-outs
into divider U-shaped flanges.
4. Release tension on sides of divider to
lock divider in place.
5. Reverse procedure to remove divider.
42-2306J
SIDE 4 OF 4 (6/99)
OPTIONAL POSTING SHELF
1. Close cabinet.
2. Push in and quickly release center of posting shelf.
Pushing on either end of posting shelf can cause shelf to
bind in cabinet.
3. Pull out on posting shelf to fully extend.
Bottom of drawer
Front of drawer/shelf
Push in and
release center of
posting shelf
Posting shelf
Divider
Rear tab
Lower tab
Divider
Squeeze
sides together
Shelf
Shelf
Slide divider
rearward and
release to lock
U-shaped
flange