Specification Sheet
-
Models:
SPECIFICATIONSDescription:
54-6689Part Number:
30-AUG-2013Issue Date:
The HON Company
200 Oak Street
Muscatine, IA 52761
800-833-3964
www.hon.com
2014 The HON Company
HON is a registered trademark
of HNI Technologies, under license
to The HON Company.
C
MODEL: HVL304
Technical Specifications
Nesting & Stacking Guest Chair
KEY DIMENSIONS
Max. Width.......................24"
Max. Depth......................24"
Max. Height.....................34-4/5"
Seat Size
Width.................................18-1/10"
Depth................................17-1/10 "
Height from Floor.............17-1/10"
Caster................... Black hooded 2" diameter dual wheel.
Base...................... Black or Silver painting frame.
Seat....................... 1-3/5" thick, 1-7/10 ply plywood, 1-4/5" thick urethane foam cushion.
Upholstery........... Black fabric.
Arm...................... Plastic injection molded, fixed-height.
Chair Weight........ 24.2pounds.
Shipping Weight... 29.7 pounds.
Shipped................. Assembly required.
Shipping Size........ 24-2/5" wide x 27-1/2" deep x 23-1/5" high . 2 pcs in one carton carrier.
Rating................... Furnished upon request by The HON Company Customer Service. Model HVL304
meets the State of California Department of Consumer Affairs Technical Bulletin 117 requirements.
Special Features.... A pneumatic gas cylinder is used for seating height adjustment of chair.
Note..................... All measurements are per BIFMA/CMD procedures.
CONSTRUCTION
Back Size
Width.................................16-7/10"
Height from Seat...............16-9/10"
Arm Size
Distance between arms......
18-1/10"
Height from floor..............19-3/10"
Height from seat.................
1-9/10"
Width.................................1-1/5"
Length................................1-4/5"
Back...................... Plastic injection molded
54-6841