© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
lnstallation • Attach the cargo nets onto the cargo divider hooks. • Slide the four pins of the cargo divider into the upright support. Attach the cargo nets to the anchor on the rear trim. CARGO NETS UPRIGHT SUPPORT HOOKS (4) CARGO DIVIDER UPRIGHT SUPPORT PINS (4) HOOKS CARGO DIVIDER CARGO NET CARGO NETS (2) ANCHOR 2 CARGO NET © 2008 American Honda Motor Co., Inc. - All Rights Reserved.
lnstallation When Not In Use • When Equipped With Another Attachment Kit Remove the cargo nets. Release the two upper pins from the upright supports and fold the cargo divider down. • When installing the trunk tray, insert the trunk tray between the trunk side lining and upright supports as shown. UPRIGHT SUPPORT UPRIGHT SUPPORT CARGO DIVIDER UPRIGHT SUPPORT CARGO DIVIDER UPRIGHT SUPPORT TRUNK TRAY TRUNK SIDE LINING CARGO DIVIDER PINS (2) © 2008 American Honda Motor Co., Inc.
08U35-TA0-1000-81 © 2008 American Honda Motor Co., Inc. - All Rights Reserved. © 2007 American Honda Motor Co., Inc. - All Printed in Japan Rights Reserved.