Radio User Manual

Installing the Audio Unit and Pocket Assembly

5. While holding the audio unit close to the center

panel opening, plug the vehicle 20-pin connector

and antenna lead into the back of the audio unit.

6. Slide the audio unit and pocket assembly into the

center panel opening and install the four

4 x 16 mm self-tapping screws.

7. Turn the ignition key on, and enter the radio

anti-theft code.

8. Check the operation of the audio unit as described

in the Owner’s Manual supplied.

9. Set the radio clock.

10. Reinstall all removed parts.

11. Put the AM/FM CD Tuner Owner’s Manual in the

glove box.

2828210K

VEHICLE 20-PIN

CONNECTOR

ANTENNA LEAD

4 x 16 mm

SELF-TAPPING

SCREWS

AUDIO

UNIT

XXXXXXXXXXX

use the 5 x 16 screws that

were included separately,

not the 4 x 16 self tapping

ones

XXXXXXXXXXXXXXXXXXXXXXXXX 5 x 16 screws