Automobile Accessories User Manual

© 2000 American Honda Motor Co., Inc - All Rights Reserved. All 21624 (0008) 9 of 12
28. Remove the upper bolt that fastens the engine
hood opener, and attach the ground terminal of the
security system wire harness with the ground bolt
from the kit.
29. Plug the 1-pin connector (white) of the security
system wire harness into the No. 5 connector of
the fuse box.
30. Under the dashboard at the fuse box, locate the
4-pin connector blue-taped to the vehicle harness
(22-pin connector), and remove the blue tape to
free the connector. Connect the 4-pin connector
you just freed to the 4-pin connector (C) of the
security system harness.
31. Unplug the 20-pin connector from the left fuse box,
and plug the two 20-pin connectors (white) of the
security system wire harness in between.
32. Locate the 2-pin connector blue-taped to the
vehicle harness 18-pin connector, and remove the
blue tape to free the connector. Connect the 2-pin
connector you just freed to the 2-pin connector of
the security system wire harness.
1-PIN CONNECTOR OF
SECURITY SYSTEM WIRE
HARNESS (WHITE)
GROUND TERMINAL OF
SECURITY SYSTEM
WIRE HARNESS
GROUND BOLT
(from kit)
ENGINE HOOD
OPENER MOUNT BOLT
(Discard.)
ENGINE HOOD
OPENER
No. 5
CONNECTOR
OF FUSE BOX
VEHICLE
22-PIN CONNECTOR
BLUE TAPE
(Remove.)
4-PIN
CONNECTOR OF
SECURITY
SYSTEM WIRE
HARNESS
(WHITE)
SECURITY SYSTEM
WIRE HARNESS
LEFT
FUSE
BOX
VEHICLE
18-PIN CONNECTOR
LEFT
FUSE
BOX
BLUE TAPE
(Remove.)
VEHICLE
2-PIN CONNECTOR
2-PIN CONNECTOR OF
SECURITY SYSTEM
WIRE HARNESS
SECURITY SYSTEM
WIRE HARNESS
VEHICLE
20-PIN
CONNECTOR
20-PIN CONNECTORS
OF SECURITY SYSTEM
WIRE HARNESS
SECURITY SYSTEM
WIRE HARNESS
LEFT
FUSE
BOX