- Honda Portable Generator Owner's Manual

AC applications

1. Start the engine and make sure the pilot lamp comes on. If not, the

filament may be burnt out.

2. Turn the voltage selector switch to either position as required. When the

switch is turned to “120V ONLY” position, you can use only 120V AC.

At “12OVf24OV” position, you can use both 120V and 240V sources.

3. Switch on the AC Circuit Breaker.

4. Plug in the appliance.

CAUTION: Be

sure that appliances do

not exceed the rated load

for more

than 30 minutes, and never exceed the maximum load. Substantial over-

loading will switch off the circuit breaker. Lesser overloading will not

switch off the circuit breaker and will shorten the service life of the gen-

erator.

NOTE: This generator is equipped with an AVR (Automatic Voltage

Regulator) for stable voltage supply.

PILOT

LAMP

VOLTAGE

SELECTOR

SWITCH