- Honda Generator Owner's Manual

＊
＊
19
AC Operation
VOLTAGE SELECTOR SWITCH
1
AC CIRCUIT PROTECTORS
AC CIRCUIT BREAKER
1:Except EM3800SX
Start the engine (see page ).
Turn the voltage selector switch to either position.
With the voltage selector switch in the ‘‘120/240V’’ position, you can
use the 120V and 120/240V receptacles simultaneously. If you are
NOT using the 120/240V receptacle, but require more power from
the 120V locking plug receptacle, then select the ‘‘120V ONLY’’
position.
Plug in the appliance.
Most motorized appliances require more than their rated power for
startup.
Do not exceed the current limit specified for any one receptacle. If an
overloaded circuit causes the AC circuit breaker or AC circuit protector
to switch OFF, reduce the electrical load on the circuit, wait a few
minutes and then reset the AC circuit breaker or AC circuit protector.
Switch the AC circuit breaker ON.
1.
2.
4.
3.
30
03/11/17 18:41:04 31Z21600_020