- Honda Generator Owner's Manual
−
19
CONTROL & FEATURES
i-Monitor
i-Monitor at Start Up
i-Monitor Display Mode 1 Total Operating Hours
i-Monitor Display
Display Backlight Flashes
i-MONITOR BUTTON
SINGLE-DIGIT
SCREEN DISPLAY
FOUR-DIGIT
SCREEN DISPLAY
TM
TM
TM
TM
TM
TM
TM
TM
TM
TM
TM
The i-Monitor is a user interface that allows the operator to view
(when the generator is running) total operating time in hours,
generator output, engine RPM, battery voltage and error messages.
The different display modes are selected by pressing the i-Monitor
button.
This mode displays the total operating hours of the generator. When
the generator is running, the total operating time accumulates. If the
total operating time is less than one hour, the numeric display will be
‘‘0.’’ When the operating time is one hour or greater, the display will
be ‘‘1’’ or ‘‘2’’ and so on. Base the generator’s maintenance schedule
on the accumulated time displayed.
The i-Monitor display is divided into two screens. The single-digit
screen displays the i-Monitor mode which is represented by a
number 1 through 4. The four-digit screen displays the four mode
values or any activated error messages.
During start up, the i-Monitor display and all three indicators will
simultaneously blink once. The condition of the i-Monitor display
andallthreeindicatorscanbecheckedwiththeaidofanobserver.
Once the generator is running, the Output indicator (green) and the
i-Monitor display will remain lit.
If the key is left in the ON position for over 30 seconds without starting
the engine, the display will start to flash.
TM
05/04/25 09:40:57 31Z11600_020