- Honda Lawn Mower User Manual

Check that the belt is properly installed on the pulley with a 90’

twist between the drive pulley and the idler pulley. Be sure the “V”

of the belt goes in the “V” of the pulley.

5. Start the engine, move the hydraulic cylinder selector lever (optional

part) to “FRONT”, and raise the cutter deck fully with the hydraulic

lift lever.

- 6. Turn the descent speed adjust knob fully clockwise to prevent

descent.

7. Stop the engine and remove the key from the engine switch.

8. Screw in the belt tension adjust knob until the stopper of the ten-

sioner arm contacts the frame.

STOP

TENSIONER ARM

9. Return the descent speed adjust knob to the original position.

The cutter deck will automatically lower to the ground as the

descent speed adjust knob is turned counte&lockwise. Keep clear of the

deck.