- Honda Rotary Mower Owner's Manual

THROTTLE CONTROL CABLE ADJUSTMENT

1. Move the throttle lever to “CHOKE”.

2. Push the control lever at the carburetor with your

finger to check if it is positioned at the extreme

right.

3. If adjustment is necessary, loosen the cable lock

nut. Turn the adjusting bolt in or out as required

until the lever is completely right. Tighten the

lock nuts securely.

4. Start the engine and make sure the engine is stop-

ped when moving the throttle control lever to

“STOP”.

ADJUSTING BOLT

CHOKE-

PUSH Iy)\/ )