user manual

102
TAKING CARE OF UNEXPECTED PROBLEMS
Running the outboard motor without
suf f icient cooling water will damage
the water pump and overheat the
engine.
If the engine fails to start, remove
the spark plugs and dry them, then
reinstall the spark plugs and
attempt to start the engine again.
If the engine starts, and no
mechanical damage is evident,
continue to run the engine for a
half hour or longer. Be sure the
water level is at least 2 inches (5
cm) above the antiventilation plate
to avoid overheating and water
pump damage.
As soon as possible, take the
outboard motor to an authorized
Honda Marine dealer for
inspection and service.
Attempt to start the engine (be sure
the water level is at least 2 inches
above the antiventilation plate).
Put a teaspoon of engine oil into
each spark plug hole to lubricate
the inside of the cylinders.
Reinstall the spark plugs.
If the engine was running when it
submerged, there may be
mechanical damage, such as bent
connecting rods. If the engine
binds when cranked, do not
attempt to run the engine until it
has been repaired.
7.
6.
5.
11/03/17 10:50:08 31ZY2630_103