user manual

28
Common Controls
Power Trim/Tilt Switch
CONTROLS AND FEATURES
(side-mount type) (top-mount type)
(panel-mount type)
CONTROL
LEVER
CONTROL LEVER
CONTROL
LEVER
DUAL TYPE
(LEFT) (RIGHT)
POWER TRIM/TILT SWITCH
POWER
TRIM/TILT
SWITCH
POWER TRIM/TILT SWITCH
POWER TRIM/TILT SWITCH
SINGLE TYPE
CCOONNTTRROOLL
LLEEVVEERRSS
The power trim/tilt switch is located
on the control lever. It is a rocker
switch with UP and DN (down)
positions for changing the angle of
the outboard motor.
You can use the power trim/tilt
switch anytime whether the boat is
underway, stopped, or the ignition
switch is in the OFF position. It is
necessary for the ignition switch to
be in the ON position for the trim
meter to indicate the outboard motor
angle.
Trim the outboard motor to obtain
the best performance and stability
(p. ).
Tilt the outboard motor for shallow
water operation, beaching, launching,
or mooring.
For dual mount outboard motors, tilt
them up at the same time.
53
11/03/17 10:36:24 31ZY2630_029