user manual

49
STOPPING THE ENGINE
Emergency Engine Stopping
OPERATION
PULL
CONTROL PANEL
EMERGENCY
STOP SWITCH
EMERGENCY
STOP SWITCH
EMERGENCY
STOP SWITCH
LANYARD
EMERGENCY STOP
SWITCH CLIP
EMERGENCY
STOP SWITCH
CLIP
EMERGENCY
STOP SWITCH
LANYARD
PULL
Side-Mount Type
Panel-Mount/Top-Mount Types
TAKING CARE OF
UNEXPECTED PROBLEMS
To stop the engine in an emergency,
pull the emergency stop switch clip
out of the emergency stop switch by
pulling the emergency stop switch
lanyard.
During the warm-up period, check
the oil pressure indicator (p. ),
overheat indicator (p. ), and
cooling system indicator (p. ).
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
on
p. .
If the fast idle control was used to
warm-up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
We suggest that you stop the engine
this way occasionally to verify that
the engine and emergency stop
switch are operating properly.
6.
34
35
34
89
11/03/17 10:40:25 31ZY2630_050