user manual

○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
62
SERVICING YOUR OUTBOARD MOTOR
REGULAR SERVICE PERIOD
Perform at every indicated month or operating
hour interval, whichever comes first.
Every
6 years
or
1200 hrs.ITEM
Water separator
Fuel filter
Fuel filter
(High pressure type)
Thermostat and thermostat cover
Fuel line
Battery and cable connection
Bolts and nuts
Crankcase breather tube
Cooling water passages
Coolant leak
Water pump
Housing, Impeller
Emergency stop switch
Engine oil leak
Each operation part
Engine condition (5)
Power Trim/Tilt
Shift Cable
Check
Check
Replace
Check
Replace
Check
Check
Replace
Check-tightness
Check
Clean
Check
Check
Check
Check
Check
Check
Check
Check
Check-adjust
First month
or
20 hrs.
(2)
Every
6 months
or
100 hrs.
(2)
(2)
(4)
(2)
(2)
Every year
or
200 hrs.
(2)
(2)
(2)
(2)
Every
2 years
or
400 hrs.
(2)
Every 2 years (If necessary) (2) (8)
Each use
(7)
After use
(4)
(3)
Check level-tightness
Lubricate more frequently when used in salt water.
These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient. Refer to the
Honda shop manual for service procedures.
For professional commercial use, log hours of operation to determine proper maintenance intervals.
When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
Upon starting, check for unusual engine sounds and cooling water flowing freely from the check hole.
Check the fuel line for leaks, cracks or damage. If it is leaking, cracked or damaged, take it to your servicing dealer for replacement before
using your outboard.
Check the fuel line for leaks, cracks, or damage. Replace the fuel line if there are signs of leaks, cracks or damage.
(1)
(2)
(3)
(4)
(5)
(7)
(8)
11/03/17 10:42:48 31ZY2630_063