user manual

150 A
97
Replacement
TAKING CARE OF UNEXPECTED PROBLEMS
FUSE CASE LID
SPARE FUSEFUSE (150 A)
‘‘150 A’’ MARK
ACG Fuse
Never use a f use with a rating
greater than specif ied. Serious
damage to the electrical system could
result.
Reinstall the fuse cover and the
engine cover.
Reconnect the battery.
If a blown fuse is found, try to
determine and correct the electrical
problem that caused the blown fuse.
An uncorrected electrical problem
may cause the fuse to blow again.
If fuses continue to blow, take the
outboard motor to an authorized
Honda Marine dealer for inspection
and service, or refer to the shop
manual.
Install the engine cover.
Reconnect the battery.
Be sure the fuse case lid is
securely locked.
After finishing replacement, install
the fuse case lid with its hook
toward the engine side.
ACG FUSE:
Install a new fuse with the ‘‘150
A’’ mark downward.
Remove the old fuse by removing
two 5 mm screws.
Remove the fuse case lid.
Remove the engine cover.
Disconnect the battery.
Stop the engine.1.
2.
6.
7.
3.
4.
5.
6.
7.
8.
9.
10.
11/03/17 10:49:13 31ZY2630_098