Outboard Motor User Manual

47
OPERATION
ON
OFF
IGNITION
SWITCH
KEY
START
CONTROL
LEVER
N(neutral)
Set the control lever in the N
(neutral) position.
The engine will not start if the F
(forward) or R (reverse) gears are
engaged.
The engine will not start or run
unless the emergency stop switch
clip is in the emergency stop
switch.
When the engine starts, release the
key, allowing it to return to the ON
position.
Turn the ignition switch key to the
START position and hold it there
until the engine starts.
Turn the ignition switch key to the
ON position; the buzzer will sound
twice.
The emergency stop switch clip
and emergency stop switch lanyard
system is a safety device that will
stop the engine if you fall away
from the controls while operating
the boat.
Always attach the emergency stop
switch lanyard securely to the
operator or to the operator’s PFD
before starting the engine.
3.2.
4.
11/03/17 10:40:04 31ZY2630_048