Outboard Motor User Manual

‘‘ ’’
2.5 lbf·ft (3.4 N·m , 0.35 kgf·m)
76
SERVICING YOUR OUTBOARD MOTOR
FUEL HOSES
SUSPENSION STRAP
SUSPENSION STRAP
FUEL STRAINER
‘‘I’’ MARK
STRAINER ASSEMBLY
SCREW (3)
STRAINER CUP
FUEL FILTER
STRAINER BODY
Thoroughly clean the strainer cup,
and replace with a new fuel filter.
Reassemble the strainer body and
the cup.
STRAINER TIGHTENING
TORQUE:
Install the suspension strap to the
fuel strainer.
Alignthe I markonthe
suspension strap as shown below
and install the fuel strainer to the
bracket.
Remove the strainer assembly. If it
is difficult to remove the strainer
assembly by yourself, consult an
authorized Honda Marine dealer.
Remove the suspension strap from
the fuel filter bracket, and then
remove the strap from the fuel
filter assembly.
Remove the three screws and
separate the fuel strainer cup from
the strainer body.
Before removing the fuel filter, to
prevent fuel leakage, place
commercially available fuel hose
clips on the fuel hoses on each side
of the fuel filter.
5.
6.
3.
7.
8.
4.
9.
11/03/17 10:45:18 31ZY2630_077