- Honda Water Pump WP20X, WP30X Owner's Manual

SERVICING YOUR PUMP
ENGINE OIL CHANGE
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
1. Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap/dipstick
and the drain plug.
2.Allow the used oil to drain completely, then reinstall the drain plug,
and tighten
it securely.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take used oil
in a sealed container
to your local recycling center
or service station for reclamation. Do
not throw
it in the trash ,pour it on the ground, or down a drain.
3. With the engine in
a level position, fill to the outer edge of the oil
filler hole with the recommended oil (see page 32
).
Engine oil capacity: 0.63 US qt (0.60 0, 0.53 Imp qt)
The Oil Ale@ system
will automatically stop the engine before the
oil level falls below the safe
limit. However, to avoid the
inconvenience of an unexpected shutdown, fill to the upper limit,
and check the oil level regularly.
4. Screw in the oil filler cap/dipstick securely.
OIL LEVEL
DRAIN PLUG
OIL FILLER CAP/DIPSTICK
31