Product Manual

16 ENGLISH
TECHNICAL INFORMATION
Serial Number Location
Record the engine serial
number, type and purchase
date in the spaces below. You
will need this information when
ordering parts and when
making technical or warranty
inquiries.
Engine serial number: __ __ __ __ — __ __ __ __ __ __ __
Engine type: ___ ___ ___ ___
Date Purchased: ______ / ______ / ______
Battery Connections for Electric Starter (applicable types)
Use a 12-volt battery with an ampere-hour rating of at least 18 Ah.
Be careful not to connect the battery in reverse polarity, as this will
short circuit the battery charging system. Always connect the
positive (+) battery cable to the battery terminal before connecting
the negative (–) battery cable, so your tools cannot cause a short
circuit if they touch a grounded part while tightening the positive
(+) battery cable end.
WARNING: Battery posts, terminals, and related accessories
contain lead and lead compounds. Wash hands after handling.
1. Connect the battery positive (+) cable to the starter solenoid
terminal as shown.
2. Connect the battery negative (–) cable to an engine mounting
bolt, frame bolt, or other good engine ground connection.
3. Connect the battery positive (+) cable to the battery positive
(+) terminal as shown.
4. Connect the battery negative (–) cable to the battery negative
(–) terminal as shown.
5. Coat the terminals and cable ends with grease.
A battery can explode if you do not follow the correct
procedure, seriously injuring anyone nearby.
Keep all sparks, open flames, and smoking materials
away from the battery.
SERIAL NUMBER &
ENGINE TYPE LOCATION
ELECTRIC
STARTER
(applicable
types)
STARTER
SOLENOID
POSITIVE (+) BATTERY CABLE
NEGATIVE (–)
BATTERY CABLE
Remote Control Linkage
The throttle and choke control levers are provided with holes for
optional cable attachment. The following illustrations show
installation examples for a solid wire cable and for a flexible, braided
wire cable. If using a flexible, braided wire cable, add a return spring
as shown.
It is necessary to loosen the throttle lever friction nut when
operating the throttle with a remote-mounted control.
REMOTE THROTTLE LINKAGE
REMOTE CHOKE LINKAGE
THROTTLE LEVER
FRICTION NUT
Flexible wire core
mounting
RETURN
SPRING
Solid wire core
mounting
WIRE
5 mm
CIRCLIP
4 mm SCREW
WIRE HOLDER
THROTTLE
LEVER
OPTIONAL
WIRE HOLDER
CHOKE LEVER
32Z4HA00.fm 16 ページ ２０１２年７月１１日 水曜日 午前１０時３分