User Manual
Table Of Contents
1.
COMMON MODEL INFORMATION
DESCRIPTION
TIE BAR INSTALLATION (DUAL MOTORS WITH CABLE STEERING)
For BF200NBF225A see DUAL MOTOR INSTALLATION on page 8-1 1.
1. As described in the applicable model-family chapter, set up steering cable and steering link arm.
PART NO.
STEERING
WASHER
(2)
ITEM
1
la
Ib
Ic
Id
IOX
1.25
mm
(2)
\'
.
QTY
DESCRIPTION
1
Tie bar assembly
2 3/8-24 UNF Self-locking nuts
2 1/2-3/8 in Reducer bushings
2 3/8
in
I.D.
Flat washers
2 3/8-24 UNF Hex head bolts
2. Install a steering plate on each motor.
TORQUE:
34 N*m (25 ft-lb)
I
Tie Bar Kit
I
50850-ZV5-000AHl
PARTS
LISTING
I
le
I
2 11/2-20 UNF Right hand thread jam nuts
I
I
If
I
1 11/2-20 UNF Left hand thread jam nut
I
One end
of
the tie bar center tube, threaded rod, and rod end have left-hand threads while the other end has
right-hand threads. If the tie bar assembly should become disassembled, do not try to interchange the parts
from one end to the other.
Date
of
Issue: June
2003
0
2001-2003
American Honda
Motor Co..
Inc.
1-24