User Manual

1. COMMON MODEL INFORMATION
Teleflex Seastar@
Steering Cylinder Installation
I
SEASTAR PRO
I
Horse Power Limitations
Single Cylinder, Single Engine
Counter Rotating, Splashwell Mount. .......... 225 HP
Counter Rotating, Side/Front Mount. .......... 300 HP
Non Counter Rotating, Side/Splashwell Mount. .. 300 HP
Non Counter Rotating, Front Mount .......... 450 HP
Counter Rotating, Splashwell Mount. .......... 450 HP
Counter Rotating, Side/Front Mount. .......... 600 HP
Twln Cyllnders, Twln Engine
................... .600 HP
You will need the following tools to complete your installation.
03" (77mm) diameter Hole Saw or Key Hole Saw
05/16" (8mm) dia. Drill Bit
07/16", 9/16", 5/8" and 3/4" Open End type Wrenchppanner
*15/16" Socket for SeaStar Helms
Single Cyllnder, Twln Englne
Tools
Additional tools needed
20" Mount Wedge
'Key Hole or Sabre Saw
05/16" (8mm) dia. Drill Bit
01/2" Wrench/Spanner, Box or Open End type
07/16" Socket and Drive
Cyllnder, Outboard Front Mount Type
*5/8", 3/4", 1/2", 9/16" Wrench/Spanner, Box or Open End type,
05/32" Allen Keymrench
Cyllnder, Slde Mount / Splashwell Mount Type
01-5/16'' Wrench/Spanner, Open or Adjustable type
03/16" Allen KeyNrench
03/8" Drill Bit
2 required.
prevent them from seizing.
Lubricate support rod and all moving parts wlth a quality marlne
grease,
Do not remove protective caps from fittings and fitting ports until
hose or tube connections are made. Contaminants
in the steering
system may cause premature wear and steering malfunctions.
DO NOT use the SeaStar PRO Helms wlth side mount cyllnder
HC5370
or splashwell mwnt cyllnder HC-0 as they are
Incompatible with unbalanced cylinders.
1127
Date of Issue: June 2003
0 2001-2003 American Honda Motor Co., Inc.