User Manual

7. BFI 1 SAIBFI 30A
5. Slide off the corrugated cardboard engine cover
protector.
(mglnr cow protector)
6. Remove the plastic cover from the outboard
motor.
7. Remove the two nuts and remove the steel band
from the outboard motor.
STEEL BAND
PLASnC COVER
/
‘t
TlMlNQ BELT COVER
NUf (2)
8. Connect a hoist to the engine hanger. Carefully
lif! the outboard motor with the lower crate frame
attached.
Use a suitable hoist with a capacity rating of 550 Ib
(250 kg) or more.
Lift up the outboard motor while supporting it
and take care not to let the outboard motor
swing.
Take care not to damage
the timing belt cover
while lifting
the outboard motor.
ENGINE HANGER
7-3
Date of Issue: June 2003
0 2001-2003 American Honda Motor Co., Inc.