User Manual

9. GAUGES
8. When a fuse is burned out, investigate and repair the
Check
cause of the short before replacing the fuse. Be sure
to replace the fuse with the specified capacity.
/I
9. If a terminal is oxidized or corroded, remove the
oxidation or corrosion with a nonconductive plastic
scrub pad and contact cleaner before reconnecting it.
Oxidation or
corrosion
10. When disconnecting locking couplers, be sure to
disconnect the locking device carefully.
11. When disconnecting couplers, hold the coupler
bodies, not the wires, and pull apart evenly.
Do not pull on wire harnesses.
A
94
Date of Issue: June 2003
0 2001-2003 American Honda Motor Co., Inc.