User Manual

9. GAUGES
22. Clamped wires or wire harnesses should not touch or
rest on rotating or moving parts.
CORRECT
..
..
. . .... -- _.
-xk).. INCORREC’I
Do not touch!
23. Be sure all wires and wire harnesses are routed away
from hot surfaces.
-._
24. Wires should not lay or rest on sharp body edges or
parts.
..
Wires should be routed clear of bolts and screw heads
or ends.
25. If wire harnesses cannot be routed to avoid a sharp
corner edge, protect that portion of the harness by
applying
a tube covering.
Date of Issue: June 2003
0 2001-2003 American Honda Motor Co., Inc.
918