User Manual
Table Of Contents
9.
GAUGES
Ref
1
Water Pressure Gauge*
Qty. Description
1
Water Pressure
Gauge
Mounting Bracket
Rubber Hose
1/8"
NPT Fitting
I
7
I
1
I
Adaptor1/8"NPTFToBSPT
I
@I&
0
1/8"
BSPT (British Pipe
Ac
1/8"
NPTF (National
Thread- male) Pipe Thread- female)
*
The water pressure gauge is not included in the
5
gauge set. It must be ordered separately.
Use
the
Teleflex
Instrument Harness
(PIN
32200-ZW7-000AH)
to
connect
Teleflex
gauges
to
the
Honda
main
harness (refer to
9-36).
GAUGE INSTALLATION
1.
Disconnect the negative battery terminal cable.
2.
Select a mounting location for the appropriate gauge(s) which
provides easy readability from the operator's position. Check
behind each mounting hole location for sufficient installation
clearance.
3.
Cut a hole
in
the dash for each gauge to the specification shown.
4.
Mount the gauges with the appropriate mounting bracket, star
washers and lock nuts as shown starting on the next page. Tighten
the nuts until the gauge can no longer be rotated in the dash.
Volt
Meter
Fuel Gauge
I
52.4 rnrn (2-1/16")
I
52.4 rnrn (2-1116")
If necessary, shorten the clamp legs if the dashboard thickness exceeds clamp grip range.
Do
not overtighten the mounting nuts. Overtightening the nuts June crack the gauge housing, mounting
bracket or mounting panel.
Date
of
Issue: June 2003
0
2001-2003 American Honda Motor
Co.,
Inc.
9134