User Manual

10. CONTROL BOXES AND TEMPLATES
6.
Before installing the 8 x 35 mm control lever
bolt, install the control cables into the control
box (see page 10-23).
POWER TRlMFlLT
CONTROL SWITCH WIRE
\
LEVER \ \I
HOLD-DOWN
SWITCH WIRE CONNECTOR
(3)
Route the power trimhilt switch wire harness as
shown.
Install the hold-down plate and tighten the
two
screws. Connect the switch wire connectors.
CONTROL LEVER
BOLT,
8 x 35 mm
\ / (apply threadlock)
WASHER
8. With the control lever in the neutral position,
apply one or
two drops of Hondalock 1
(P/N 0871 3-0001) or commercially available
Loctite 271@ to the threads. Install and tighten
the 8 mm bolt.
TORQUE: 20 N.m (2.0 kg-m, 14 ft-lb)
SCREW(2) a
9. Install cover C and tighten the screws securely.
TORQUE: 2 N.m (0.2 kg-m, 1.4 ft-lb)
I NOTICE I
Overtightening the mounting screws can
damage or distort the control
box.
10-22
Date of issue: June 2003
0 2001-2003 American Honda Motor Co., inc.