User Manual

10. CONTROL BOXES AND TEMPLATES
CHANGE IN THE CONTROL LEVER
POSITION
RIGHT-HAND REMOTE
CONTROL
BOX
2. Remove the four screws and remove the dwell
plate retainer.
CAM PLATE
I
LEFT-HAND REMOTE
CONTROL BOX
The remote control box permits you to change the
control lever position from the right-hand side to the
left-hand side or vice versa.
SCREW DWELL PLATE
\ RETAINER
BACK PLATE
\
CIRCLIP THROTTLE ARM ASSY.
3. Remove the circlip, then remove the plate.
PLAIN
BRAKE SHOE
\
SCREW
SCREWS
1. Loosen the five screws and remove the back
plate.
HEX
THROTTLE ARM ASSEMBLY
4. Remove the E-ring and plain washer from the
throttle shaft, loosen the adjusting screw, and
remove the throttle arm assembly and bushing.
5. Remove the brake disk and brake shoe
assembly.
THROTTLE SHAFT
6. Loosen the two hex head bolts and remove the
throttle shaft.
Date of Issue: June 2003
0 2001-2003 American Honda Motor Co., Inc.
10132