User Manual

10.
11.
Install the back plate in the reverse order of
removal.
Y \WAVE WASHERS
SCREWS
Remove the screws, wave washers and set
washer. Set the remote control box
so that the
mounting holes align with the mounting holes in
the base.
\L 1 LARGE PlplN WASHER
SCREW
13. Install the base to the mounting plate (hull) with
the screws and nuts.
When the mounting plate thickness is less than
20 mm, use the screws, nuts and large plain
washers. When
20 mm or more, use the
12. Tightly screw the base to the remote control
wooden screws.
TORQUE: 5-8 N*m (0.5-0.8 kg-m, 3.6-5.8 ft-lb)
box.
TORQUE: 3-45 N*m (0.3-0.5 kg-m,
2.2-3.6 ft-lb)
10137
Date of Issue: June 2003
0 2001-2003 American Honda Motor Co., Inc.