User Manual

1. COMMON MODEL INFORMATION
TRIM TAB ADJUSTMENT
After engine break-in, run boat at full speed and
check to see if boat pulls to the left or right, or an
uneven effort is required to turn left or right. Adjust
trim tab as required to ensure good, straight running
characteristics.
BF2OOAl225A shown.
If boat pulls to the left:
Loosen trim tab lock bolt and move trim tab trailing
edge to the left.
If boat pulls to the right:
Loosen trim tab lock bolt and move trim tab trailing
edge to the right.
Dual Motors
BFZOONBF225A
shown.
STANDARD
ROTATION
L I
\
10 x 32 mm TRIM
TAB LOCK BOLT
1. Remove the trim tab lock bolt and trim tab from
the standard rotation outboard motor.
2. Replace the trim tab with the gear case cover
and tighten the bolt.
TORQUE:
34 N*m (25 ft-lb)
Date of Issue: June 2003
0 2001-2003 American Honda Motor Co., Inc. 1-44