User Manual

2. BF8DIBF9.9D
REMOTE CABLE INSTALLATION
First, install the remote control box and cables.
Remote Control Cables
LOCK PLATE (2)
1.
1.
2.
Remove the four (4) screws on each lower case
cover and loosen the top-rear screw.
GRO~MET
.
Remove the grommet and the control cable
plate.
Place the grommet over the cables, even with
the locking grooves. The shift cable must be on
the bottom
2. Pull the covers out from the engine about
20 mm (0.78 in) and allow them to droop.
3. Slide the plate into the grooves, press the
grommet against the plate, and slide the
assembly into position in the lower case.
2-1 1
Date of Issue: June 2003
0 2001-2003 American Honda Motor Co., Inc.