User Manual

2. BF8DIBF9.9D
Wire Harness
1. Place the white tie-wrap on the harness near
the grommet, and connect the white and the
blue harness connectors to their respective
plugs on the engine.
2. Slide the connectors onto their tabs on the CDI
bracket. Be sure they click into position.
3. With the white tie-wrap inside the grommet,
slide the harness into the grommet and into the
plastic support. Close the support around the
harness.
24 3
Date of issue: June 2003
0 2001-2003 American Honda Motor Co., Inc.