User Manual

3. BF15DIBF20D
STEERING CONNECTIONS
Do this before final placement of the motor on the transom.
Refer to the steering cable manufacturer’s manual for cable handling procedures.
STEERING CABLE NUT
CAP (2)
(When steering cable
RING LINK ROD
3.8-24 UNF BOLT
STEERING CABLE
(marine grease)
Tilt Tube Type
CAP (2)
-
TILT SHAFT
STEERING CABLE
I
-6a
(marine
/ CAP
STEER IN^ CABLE NUT
1.
Remove the left and right caps from the tilt tube.
(marine grease)
ASSEMBLY
2. If the steering wheel is mounted on the
starboard side, insert the steering cable through
the hole
in the tilt tube on the starboard side and
attach the cable with the steering cable nut.
Apply marine grease to the inner and outer
cable before installation.
3. Install the sealed end cap to the tilt tube over
the steering cable.
Date of Issue: June 2003
0 2001-2003 American Honda Motor Co., Inc.
318