- Honda Tiller Owner's Manual

22
CONTROLS AND FEATURES
Power tilt is a convenience for
tilting the motor, shallow water
operation, and trailer only. It is not
designed to be used as a trim
function to adjust the trim angle
of the boat.
TILT LEVER
POWER TILT SWITCH
Press UP
to tilt the
motor up.
Press DN to tilt
the motor down.
TTIILLTT
RRUUNN
((LLOOCCKK))
Power Tilt Switch (T type) Tilt Lever (G type)
(gas assist tilt type)
Moving the tilt lever to the TILT
position allows the outboard motor to
be tilted and moving the tilt lever to
the RUN (LOCK) position locks the
outboard motor in the desired
position. Use the tilt lever to
temporarily tilt the outboard motor
when the boat is operating in shallow
water, or mooring in shallow water.
The tilt lever must be in the RUN
(LOCK) position before operating
the outboard motor or the motor
could tilt up when operating in
reverse.
The rocker type power tilt switch has
UP and DN (down) positions for
changing the angle of the outboard
motor.
During shallow water operation,
beaching, launching, or mooring,
proceed at low speed with a small
throttle opening and tilt the motor up
as necessary (p. ).59
04/01/30 10:19:26 31ZY0600_023