User Guide

AC OPERATION
Check GFCl operation before each use (see page 18 ).
1. Start the engine (see page33').
2. Make sure that the GFCl RESET button is pushed in (flush with its
base plate).
3. Switch
ON the AC circuit breaker.
4. Plug in the appliance.
Most motorized appliances require more than their rated wattage for
startup.
GFCl RESET BUTTON
AC CIRCUIT BREAKER
I I
Do not exceed the current limit specified for any one receptacle. If an
overloaded circuit causes the AC circuit breaker or circuit protector to
switch OFF, reduce the electrical
load on the circuit, wait a few minutes
and then reset the circuit breaker.
24