User Guide
Installation
1.
Install the battery tray
in
the generator, and the battery on the tray.
2.Make sure the battery is on the edge of the battery tray of the fuse
holder side. Install the battery set plate.
3.1nstall the positive
(+)
cable to the battery positive
(+)
terminal,
make sure to cover the terminal with the terminal cover. Then install
the negative
(-)
cable to the battery negative
(-)
terminal.
NEGATIVE
(-
1
CABLE
POSITIVE
(+)
CABLE
\
/
BATTERY
4.1nstall the front cover. Be sure to instal0 the cover
in
the direction
shown below.
FRONT
COVER
Longer
Shorter
54