User Guide

Toll kit
The tools supplied are necessary for performing some periodic maintenance,
simple adjustments and repairs.
Always keep the kit with the generator.
Engine oil and oil filter change
Drain the oil while the engine is still warm to assure rapid and complete
draining.
1. Remove the drain plug and filler cap, and drain the oil. Retighten the plug
securely, and reinstall the filler cap.
2. Remove the oil filter with a filter wrench and let the remaining oil drain
out.
3. Apply a thin coat of engine oil to the filter rubber seal and screw it in by
hand until you feel it seat against the engine, then turn it 314 of a turn
more.
4. Fill the crankcase with the recommended oil (See page 4) and check the
level. Recheck the level after running the engine for a few minutes.
Total oil capacity: 1.4 P
(1.48 US qt)