User Guide

5. Spark arrester maintenance (optional part)

cmm

If the engine has belen running, the-muffler will be very hot.

Allow it to cool before proceeding.

1; Loosen the three 6 mm nuts and remove the muffler protector, iden-

tification plate, muffler and gasket.

2. Remove the sparkarrestor from the muffler (take care not to demage the

wire mesh).

IDENTIFICATION PLATE

MUFFLER PROTECTOR

(OPTIONAL PART1

SPARK ARRESTER

(OPTIONAL PART)

GASKET (OPTIONiL PART)

3. Use a brush to remove carbon deposits from the spark arrester screen.

CAUTION: Be careful not to damage the spark arrester screen.

SPARK

ARRESTER

SCREEN

NOTE: The spark arrester must be free of breaks and holes. Replace, if

necessary.

4. Install .the spark arrester and the muffler in the reverse order

disassembly.