Automobile Parts User Manual

ENGLISH

Oil Level Check

Oil Change

LOWER LIMIT

OIL FILLER CAP/DIPSTICK

UPPER LIMIT

OIL FILLER CAP/DIPSTICK

DRAIN PLUG

SEALING WASHER

LOWER LIMIT

UPPER LIMIT

Check the engine oil level with the engine stopped and in a level

position.

Remove the oil filler cap/dipstick and wipe it clean.

Insert the oil filler cap/dipstick into the oil filler neck as shown,

but do not screw it in, then remove it to check the oil level.

If the oil level is near or below the lower limit mark on the

dipstick, fill with the recommended oil (see page 7 ) to the upper

limit mark.

Reinstall the oil filler cap/dipstick and tighten securely.

With the engine in a level position, fill to the upper limit mark on

the dipstick with the recommended oil (see page 7 ).

Running the engine with a low oil level can cause engine

damage. This type of damage is not covered by the

Distributor’s

Limited Warranty.

Please dispose of used motor oil in a manner that is compatible

with the environment. We suggest you take used oil in a sealed

container to your local recycling center or service station for

reclamation. Do not throw it in the trash, pour it on the ground,

or pour it down a drain.

Allow the used oil to drain completely, thenreinstall the oil drain

plug and new washer, and tighten the oil drain plug securely.

Place a suitable container below the engine to catch the used oil,

then remove the oil filler cap/dipstick, oil drain plug and washer.

Drain the used oil when the engine is warm. Warm oil drains

quickly and completely.

Reinstall the oil filler cap/dipstick and tighten securely.

Running the engine with a low oil level can cause engine

damage. This type of damage is not covered by the

Distributor’s

Limited Warranty.

07/06/01 12:39:14 32Z4D602_008