- Honda Lawn Mower User Manual

Clogged cutter deck discharge chute.

1. Wrong blades

* Use genuire Honda blades or equivalent.

2. Deck too low.

+ Raise deck and adjust deck height

properly.

3. Engine overloaded:

+ Operate at full throttle. Use lower speed

range. Set cutter deck higher than

desired height for first pass, then cut to

desired height on second pass.

4. Grass bags full * Empty grass bags.

. (Optional part).

Blades do not rotate or stop.

1. Blade belt worn or broken

.-Replace with new belt (see p. 47- 50).

2. P.T.O. lever malfunction

-See your authorized HONDA dealer.

Riding mower does not move, or clutch does not engage properly when the

transmission is shifted into gear.

1. Faulty clutch assy.

+See your authorized HONDA dealer.

2. Transmission does not

-See your authorized HONDA dealer.

shift gear.

3. Abnormal clutch engage- - See your authorized HONDA dealer.

ment.