Outboard Motor User Manual
Table Of Contents
- COVER
- INTRODUCTION
- CONTENTS
- OUTBOARD MOTOR SAFETY
- CONTROLS AND FEATURES
- CONTROL AND FEATURE ID CODES
- COMPONENT AND CONTROL LOCATIONS
- LHT TYPE (TILLER HANDLE)
- LRT AND XRT TYPES (REMOTE CONTROL)
- REMOTE CONTROL BOX (SIDE-MOUNT CONTROL TYPE) (OPTIONAL EQUIPMENT)
- PORTABLE FUEL TANK (OPTIONAL EQUIPMENT)
- TRIM METER (OPTIONAL EQUIPMENT)
- TACHOMETER (OPTIONAL EQUIPMENT)
- RUDDER METER
- TROLLING CONTROL SWITCH PANEL
- DIGITAL SPEEDOMETER (OPTIONAL EQUIPMENT)
- DIGITAL TACHOMETER (OPTIONAL EQUIPMENT)
- CONTROLS
- BEFORE OPERATION
- OPERATION
- SAFE OPERATING PRECAUTIONS
- BREAK-IN PROCEDURE
- PORTABLE FUEL TANK (OPTIONAL EQUIPMENT)
- FUEL HOSE CONNECTIONS
- FUEL PRIMING
- INFREQUENT OR OCCASIONAL USE
- STARTING THE ENGINE
- EMERGENCY STARTING
- STOPPING THE ENGINE
- GEARSHIFT AND THROTTLE OPERATION
- STEERING
- CRUISING
- TRIM TAB
- SHALLOW WATER OPERATION
- MOORING, BEACHING, LAUNCHING
- SERVICING YOUR OUTBOARD MOTOR
- CLEANING AND FLUSHING
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- INDEX
37
INDICATORS Alternator (ACG) Indicator Malfunction Indicator
CONTROLS AND FEATURES
(side-mount control)
BUZZER
(RED)
(side-mount control)
(RED)
(RED)
(RED)
ACG INDICATOR
ACG INDICATOR
(internal buzzer)
MALFUNCTION
INDICATOR
(internal buzzer)
MALFUNCTION
INDICATOR
BUZZER
LHT Type
LRTandXRTTypes
LHT Type
LRTandXRTTypes
The ACG indicator turns on and the
buzzer sounds in one-second
intervals when the charging system is
faulty.
The indicator lights come on and the
buzzer sounds when you turn the
ignition switch ON, allowing you to
see that they are working. If an
indicator does not light during this
test, it cannot alert you if that system
develops a problem. Have your
Honda Marine dealer check for
burned-out bulbs or other problems.
Under normal conditions, the
following occur when the ignition
switch is turned ON:
The ACG, Malfunction, Oil
Pressure, and Overheat indicators
light.
The buzzer will beep twice.
The Malfunction, Oil Pressure,
and Overheat indicators will go out
after the second beep.
The ACG indicator will go out
after the engine starts.
The Oil Pressure indicator will
light again after the engine starts
and will stay lit to indicate the oil
pressure is normal.
1.
2.
3.
4.
5.
11/03/09 17:39:28 31ZZ3610_038