Outboard Motor User Manual

51
OPERATION
START
POSITION
POINTER
THROTTLE GRIP
ON
OOFFFF
START
IGNITION SWITCH KEY
Using the electric starter f or more
than 5 seconds at a time will
overheat the starter motor and can
damage it.
Turning the ignition switch key to
the START position while the
engine is running can damage the
starter motor and f lywheel.
Turn the ignition switch key to the
START position and hold it there
until the engine starts.
Align the engine start symbol
‘‘ ’’ on the tiller handle with the
pointer ‘‘ ’’ on the throttle grip.
Turn the ignition switch key to the
ON position; the buzzer will sound
twice.
When the engine starts, release the
key, allowing it to return to the ON
position.
If the engine fails to start within 5
seconds, release the key and wait
at least 10 seconds before
operating the starter again.
Also, as the engine warms up, the
throttle grip can be turned to the
SLOW position without stalling.
3.
4.
5.
11/03/09 17:42:02 31ZZ3610_052