Outboard Motor User Manual
Table Of Contents
- COVER
- INTRODUCTION
- CONTENTS
- OUTBOARD MOTOR SAFETY
- CONTROLS AND FEATURES
- CONTROL AND FEATURE ID CODES
- COMPONENT AND CONTROL LOCATIONS
- LHT TYPE (TILLER HANDLE)
- LRT AND XRT TYPES (REMOTE CONTROL)
- REMOTE CONTROL BOX (SIDE-MOUNT CONTROL TYPE) (OPTIONAL EQUIPMENT)
- PORTABLE FUEL TANK (OPTIONAL EQUIPMENT)
- TRIM METER (OPTIONAL EQUIPMENT)
- TACHOMETER (OPTIONAL EQUIPMENT)
- RUDDER METER
- TROLLING CONTROL SWITCH PANEL
- DIGITAL SPEEDOMETER (OPTIONAL EQUIPMENT)
- DIGITAL TACHOMETER (OPTIONAL EQUIPMENT)
- CONTROLS
- BEFORE OPERATION
- OPERATION
- SAFE OPERATING PRECAUTIONS
- BREAK-IN PROCEDURE
- PORTABLE FUEL TANK (OPTIONAL EQUIPMENT)
- FUEL HOSE CONNECTIONS
- FUEL PRIMING
- INFREQUENT OR OCCASIONAL USE
- STARTING THE ENGINE
- EMERGENCY STARTING
- STOPPING THE ENGINE
- GEARSHIFT AND THROTTLE OPERATION
- STEERING
- CRUISING
- TRIM TAB
- SHALLOW WATER OPERATION
- MOORING, BEACHING, LAUNCHING
- SERVICING YOUR OUTBOARD MOTOR
- CLEANING AND FLUSHING
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- INDEX
2.2 lbf·ft (3 N·m, 0.3 kgf·m)
92
SERVICING YOUR OUTBOARD MOTOR
O-RING
FUEL FILTER
STRAINER CUP
FILTER BODY
FLOAT
(red ring)
PROJECTIONS
Touch the suspension
strap to the lower face
of the filter body.
Align the center of the
two fuel hoses and the
arrow of the suspension
strap rib.
Unscrew the strainer cup from the
filter body.
Thoroughly clean the strainer cup
and fuel filter.
Install the fuel filter, float, O-rings
and strainer cup.
If the fuel filter is contaminated,
replace it with a new one.
Install the suspension strap to the
fuel filter assembly as shown
above.
Reinstall the fuel filter assembly
and suspension strap in the reverse
order of removal.
6.
7.
8. 9.
10.
TIGHTENING TORQUE:
11/03/09 17:49:15 31ZZ3610_093