user manual

Table Of Contents
104
WITH OUTBOARD MOTOR
INSTALLED ON BOAT
WITH OUTBOARD MOTOR
REMOVED FROM BOAT
TRANSPORTING
To decrease
friction
(FREE)
STEERING FRICTION ADJUSTER
To increase
friction
(LOCK)
OUTBOARD MOTOR SUPPORT BAR
(commercially available)
LHT Type
(tiller handle)
LRTandXRTTypes
(remote control)
All Types
Secure the outboard motor in either
the vertical or horizontal position
shownonp. .
Use an outboard motor support bar to
prevent the outboard motor from
moving while trailering the boat.
Refer to the manufacturer’s
instructions for using an outboard
motor support bar.
Tighten the steering friction adjuster
to prevent the outboard motor from
moving while trailering the boat.
When trailering a boat with the
outboard motor attached, always
disconnect the fuel line from the
portable fuel tank.
The preferred method is to leave the
engine in the normal running position,
but if there is insufficient road
clearance, you can tilt the outboard
motor using a commercially available
outboard motor support bar available
through your dealer. Refer to the
manufacturer’s instructions for using
an outboard motor support bar.
103
11/03/09 17:51:40 31ZZ3610_105