user manual
Table Of Contents
- COVER
- INTRODUCTION
- CONTENTS
- OUTBOARD MOTOR SAFETY
- CONTROLS AND FEATURES
- CONTROL AND FEATURE ID CODES
- COMPONENT AND CONTROL LOCATIONS
- LHT TYPE (TILLER HANDLE)
- LRT AND XRT TYPES (REMOTE CONTROL)
- REMOTE CONTROL BOX (SIDE-MOUNT CONTROL TYPE) (OPTIONAL EQUIPMENT)
- PORTABLE FUEL TANK (OPTIONAL EQUIPMENT)
- TRIM METER (OPTIONAL EQUIPMENT)
- TACHOMETER (OPTIONAL EQUIPMENT)
- RUDDER METER
- TROLLING CONTROL SWITCH PANEL
- DIGITAL SPEEDOMETER (OPTIONAL EQUIPMENT)
- DIGITAL TACHOMETER (OPTIONAL EQUIPMENT)
- CONTROLS
- BEFORE OPERATION
- OPERATION
- SAFE OPERATING PRECAUTIONS
- BREAK-IN PROCEDURE
- PORTABLE FUEL TANK (OPTIONAL EQUIPMENT)
- FUEL HOSE CONNECTIONS
- FUEL PRIMING
- INFREQUENT OR OCCASIONAL USE
- STARTING THE ENGINE
- EMERGENCY STARTING
- STOPPING THE ENGINE
- GEARSHIFT AND THROTTLE OPERATION
- STEERING
- CRUISING
- TRIM TAB
- SHALLOW WATER OPERATION
- MOORING, BEACHING, LAUNCHING
- SERVICING YOUR OUTBOARD MOTOR
- CLEANING AND FLUSHING
- STORAGE
- TRANSPORTING
- TAKING CARE OF UNEXPECTED PROBLEMS
- TECHNICAL INFORMATION
- CONSUMER INFORMATION
- INDEX
48
FUEL HOSE CONNECTIONS
OPERATION
HOSE CLAMP
(stainless steel)
FUEL TANK HOSE
ASSEMBLY CONNECTOR
(fuel tank side)
FUEL TANK
HOSE
ASSEMBLY
HOSE PLUG
FUEL
HOSE
HOSE
CLAMP
FUEL HOSE
JOINT
FUEL HOSE
(outboard motor side)
BARB
ARROW
PRIMING BULB
(outboard motor side)
Connect the fuel tank hose
assembly connector to the tank, as
shown. Be sure the connector
snaps securely into place. Always
disconnect the fuel hose when
storing or transporting the
outboard motor.
Turn the portable fuel tank vent knob
counterclockwise to the open
position.
Remove the hose plug from the
outboard motor side fuel hose.
Insert the fuel hose joint into the
outboard motor side fuel hose and
secure it with the hose clamp.
Make sure the arrow mark on the
priming bulb points toward the
outboard motor side.
Store the hose plug in a secure
place.
2.
1.
11/03/09 17:41:29 31ZZ3610_049