user manual

67
Trolling Speed Control
[standard equipment (LHTC
type)]
[optional equipment (except
LHTC and LRTB types)]
[standard equipment (LRTB
type)]
OPERATION
TRL (Trolling) CONTROL
SWITCH
TRL (Trolling) CONTROL SWITCH
SWITCH
PANEL
DN: Reduce engine speed
UP: Increase engine speed
Place the outboard motor in-gear
with the throttle control in the fully
closed (idle) position. Press and hold
the UP or DN side of the TRL
control switch to activate the Trolling
Speed Control. The buzzer will make
one long sound indicating activation.
The engine speed can be adjusted in
50 RPM increments by pressing the
UP or DN side of the TRL control
switch. A short sound of the buzzer
occurs each time the engine speed is
adjusted.
The initial trolling speed is set at 850
RPM.
In Trolling Speed Control mode, the
engine speed can be adjusted
between 750 and 1,000 RPM.
Continuing to press the switch when
at either of these limits will result in
two short sounds from the buzzer.
The throttle control will operate
when in the Trolling Speed Control
mode, but once the speed reaches
3,000 RPM, the Trolling Speed
Control is deactivated. If 3,000 RPM
is not reached and the throttle is
closed, the engine speed will
decrease to the Trolling Speed
Control setting.
11/03/09 17:44:49 31ZZ3610_068