User's Manual

Navigation System
83
System Setup
4. Say or select
Done to perform the
deletion, and the display returns to
the previous screen.
Tip:
You can delete all addresses by
selecting Delete All
.
Routing & Guidance
From the
Setup screen (second), say or
select Routing & Guidance
and the
following screen appears:
Rerouting
If Rerouting is set to
Automatic
and
you deviate from the route, you will see
“Recalculating ...” at the top of the
screen for several seconds as the system
calculates a new route. This is followed
by new routing instructions.
If Rerouting is set to
Manual, you
will hear a tone wh
en the “Off route”
message is displayed. Say “Recalculate”
or select
Recalculation
on the screen
to make the system recalculate your new
route.
NOTE:
• If you live in an area with poor
mapping, you may wish to set
Rerouting to Manual
to avoid
constant recalculation. However, you
will have to manually select
Recalculation
on the screen to have
the system plot a new route.
• It is strongly recommended that you
leave the system set to the factory
default (Automatic).